Found an unrestored black/red Z06 in Chicago

I met Cary at D&M Restorations at the MCACN event in Chicago this weekend.  They have a couple of 1963 Z06 cars at the shop.  Cary invited me over and one of the cars is an unrestored Black/Red Z06 with 42,000 miles on it and built about 700 cars before mine.  I got a few photos below.

Sanding out the primer coat

The team at Autobody Dimensions spent a few weeks block sanding the primer, getting the lines as straight as possible.  The photos here also show the fit of the doors on the car.  Traditionally, C2 Corvettes could have some large gaps and slight body alignment issues straight out of the factory.  We will tighten these up in the restoration process.

Time for the primer coat

Finally the last prep coat of paint before we put color on the car.  This is all prep for black color, so we're working to get the car totally straight.  We'll let this coat dry for a few weeks and then the team at Autobody Dimensions will start block sanding again.

Gel coat sanding completed - ready for the primer coat

The gel coat is super hard paint, so the block sanding took a long time to get straight.  But, it's finally completed.  Next step is to apply the primer coat and start sanding again.

Apply additional gel coat to a couple of areas

After block sanding, there were still a couple of high spots that rubbed down to fiberglass.  Those areas were gel coated again.  We'll then sand these out and be ready for the primer coat.

Prepped and ready for the last gel coat

Ready for the last gel coat at Autobody Dimensions in Gaithersburg, MD.

Sun bathing the gel coat in the Maryland sun

We put the car out in the Maryland sun to bake the gel coat a bit more.  More block sanding is needed and then reshoot any areas with gel coat as needed.

First sanding of the gel coat completed

Tony and I were reviewing the first sanding of the gel coat.  Dale from Autobody Dimensions painted the gel coat and the team there block sanded the car.

Dale (Autobody Dimensions), Chris and Tony Avedisian (Tony's Corvettes)

Video post: Gel coat completed

Block sanding and more block sanding the gel coat

Sharp looking split window.....

Dale's managing the process of block sanding the gel coat

Doors and hood gel coat photos

Priming the motor with oil

This video shows the oil priming of the oil pump and oil flowing through the mechanical lifters, and through the push rods to the heads.

A couple more shots of the body

Fresh gel coat just applied

Dale at Autobody Dimensions just applied a fresh gel coat. We'll let this bake and set for 6 weeks and then begin sanding.

Prepping the body for the gel coat

The car is at Autobody Dimensions getting prepped for the gel coat.

Engine Build

Interior Mouldings

May 13, 2018

The interior moldings came in from John Millar's shop. Looking great.

Engine block back from the hot tank

We received the engine block back from the hot tank. Gathering rebuild parts as well.  The block came out super clean.

The Z06 brake master cylinder

Body work tuning complete

John Millar completed the work on the body.  The car is a no hit car, but we needed to do some tuning of some restoration work performed on the car in 1972.  It's looking great.